- Frequency Range: from 0.1 MHz to 20.0 GHz
- Measured Parameters: S11, S21, S12, S22
- Impedance: 50Ω
- Number of Ports: 2
- Dynamic Measurement Range, Min: 145 dB typical
- Measurement Time at One Frequency: 12 µs
- Output Power Adjustment Range: from -60 to +10 dB/mW
- Compatibility with Frequency Range Extension Modules
- Mountable in 19'' Rack
Warranty: 3 years
- Frequency range: from 0.1 MHz to 20.0 GHz
- Measured parameters: S11... S44
- Impedance: 50Ω
- Number of ports: 4
- Dynamic measurement range: 145 dB type
- Measurement time at one frequency: 12 μs
- Output power adjustment range: from -60 to +10 dB/mW
- Operation with frequency range extension modules
- Two independent signal sources
- Mounting possibility in a 19'' rack
Warranty: 3 years
- Dynamic Measurement Range: up to 130 dB
- Output Power: up to 14 dBm
- Models with Electronic Attenuator
- Number of Ports: up to 4
Warranty: 1 year
The TFE1854 module is an ultra-compact device. It consists of the following basic elements: frequency multipliers for the measurement and heterodyne signals, a broadband power amplifier with automatic regulation, directional taps and frequency converters. Also included are power supply and control boards.
The main differences of the TFE1854 are the operating frequency range of 18-54 GHz and the coaxial measuring path.
- Frequency Range: from 0.1 MHz to 9.0 GHz
- Measured Parameters: S11, S21, S12, S22
- Impedance: 50Ω
- Number of Ports: 2
- Dynamic Measurement Range, Min: 160 dB typical
- Measurement Time at One Frequency: 10 µs
- Output Power Adjustment Range: from -60 to +15 dB/mW
- Compatibility with Frequency Range Extension Modules
- Mountable in 19'' Rack
Warranty: 3 years
- Frequency Range: from 0.1 MHz to 9.0 GHz
- Measured Parameters: S11...S44
- Impedance: 50Ω
- Number of Ports: 4
- Dynamic Measurement Range, Min: 160 dB typical
- Measurement Time at One Frequency: 10 µs
- Output Power Adjustment Range: from -60 to +15 dB/mW
- Compatibility with Frequency Range Extension Modules
- Two Independent Signal Sources
- Mountable in 19'' Rack
Warranty: 3 years
The configurable front panel is distinguished by the presence of connectors providing access to intermediate frequency (IF) receiver paths and local oscillator (LO) signal.
Location of jumpers on the front panel of the device for connecting MRCHD
Connection diagram of MRCHD to vector network analyzer S4220
VAС COBALT can be connected to the following frequency range expansion modules:
- TFE1854 (produced by PLANAR);
- VECTOR series* (produced by MVEIV LLC, Chernogolovka, exclusive distributor in the Russian Federation – PLANAR);
- other global manufacturers in the frequency range up to 330 GHz (consult with PLANAR specialists regarding compatibility).
Delivered VAС COBALT can be equipped with calibration kits for coaxial and rectangular waveguide paths.
Completeness of delivery of the CobaltFX measuring system:
- PLANAR COBALT C4xxx Vector Network Analyzer (compatible with the selected VAС)
- Frequency range expansion module according to the number of required measurement ports, but not exceeding the number of VAС ports (selected from the available list)
- VAС-VAС COBALT control and power cable (1 pc. / VAС)
- RF and IF cables with a length of 1.2 m (4 pcs. / VAС, other lengths are available on request)
- 3.5 mm socket-to-socket adapter
- calibration kit (ordered separately)
- documentation set
TFE1854 |
VECTOR 50 — 75 GHz |
VECTOR 75 — 110 GHz |
VECTOR 110 — 170 GHz |
|
Frequency Range, GHz |
18 – 54 |
50 - 75 |
75 - 110 |
110 - 170 |
Compatible with COBALT Models |
C4xxx |
C4x20 |
C4x20 |
C4x20 |
Typical Output Power, dBm |
+3 |
+15 |
+4 (+10 with option) |
under negotiation |
Dynamic Range, dB |
up to 133 |
130 |
120 |
115 |
Attenuator Tuning Range, dB |
AGC 20 dB |
from 0 to -40 |
from 0 to -40 |
under negotiation |
Measurement Port Connector Type |
NMD 1.85 mm |
WR15, UG-385/U |
WR10, UG-387/U-M |
WR6, UG-387/U-M |
Dimensions, mm |
240*144*60 |
385*140*125 |
385*140*125 |
385*140*125 |
Weight, kg |
2.2 |
3 |
3 |
under negotiation |