.jpg "Control panel “Cupol-GPS”")
- Control panel “Cupol-GPS” is mounted on a mobile object and intended for definition of the mobile object location and transmission of its coordinates to the centralized supervision console over the GSM (GPRS) or radio channel.
- Device is intended for exploitation with control panels “Cupol-GSM”, “Cupol-A” in composition of “Cupol” system.
- Operation over the RS485 wire line.
- Outer antenna included.
- Feeding over the RS485 communication line.
- Small dimension and light weight.
On demand
Price Options
On demand
On order
Add to cart
Need a consult?
Our experts will answer any technical question
Ask a question
| Specifications | |
| Communication interface with control panel | RS485 |
| RS485 interface connector | TP6P4C (RJ12) |
| Coordinate location accuracy, m, or better | 100 |
| Warm up time (coordinate transmission start to SCS) after “power-on”, sec, or less | 20 |
| Coordinate transmission period to CSC, programmed: | |
| over the time, min | 1…255 |
| over the distance, m | 50…250 |
| Feeding voltage over the RS485 interface, V | 5…15 |
| Current consumption, mA, max | 80 |
| Satellite capture time: | |
| Disappearance and tuning, sec | 1 |
| Hot start, sec | 3 |
| Warm start, sec | 32 |
| Cold start, sec | 60 |
| First “ON” | Not defined |
| Operating temperature range, °C | -25…+30 |
| Dimension, mm, approx | 90×50×24 |
| Weight, kg, approx | 0,15 |
