- Frequency range: from 1 MHz to 6 GHz
- Measured parameters: S11, cable loss
- Impedance: 50Ω
- Number of ports: 1
- Dynamic range: not less than 119 dB
- Measurement time per point: 100 µs
- Output power range: from -40 to 0 dBm
- Measurement of S11, |S21|, |S12|, S22 (when using 2 reflectometers)
- Connection to devices without a measuring cable
- Compact and lightweight
1 year warranty
- Frequency range: from 85 MHz to 4.8 GHz (typical 5.4 GHz)
- Measured parameters: S11, cable loss
- Impedance: 50Ω
- Number of ports: 1
- Dynamic range: not less than 97 dB
- Measurement time per point: 200 µs
- Output power: -30; -10 dB/mW
- Measurement of S11, |S21|, |S12|, S22 (when using 2 reflectometers)
- Connection to devices without measurement cable
- The smallest and lightest among the CABAN series reflectometers
Certificate of Approval of Type of Measuring Instruments by the Russian Federation No. 55466
1-year warranty
- Frequency range: from 85 MHz to 15 GHz
- Measured parameters: S11, cable loss
- Impedance: 50Ω
- Number of ports: 1
- Dynamic range: 125 dB (85 - 4.8 GHz) / 105 dB (4.8 - 15 GHz)
- Measurement time per point: 170 μs
- Output power: -25; 0 dB/mW
- S11 measurement
- Connection to devices without measurement cable
- Compact and lightweight
- Frequency range: from 1 MHz to 18 GHz
- Measured parameters: S11, cable loss
- Impedance: 50Ω
- Number of ports: 1
- Dynamic range: 120 dB (1 - 6 GHz) / 104 dB (6 - 18 GHz)
- Measurement time per point: 100 μs
- Output power adjustment range: from -15 to 0 dB/mW
- Measurement of S11, |S21|, |S12|, S22 (when using 2 reflectometers)
- Connection to devices without measurement cable
- Compact and lightweight
1 year warranty
Reflectometers of the CABAN series are operated by an external computer. Power and communication with the computer are carried out via the USB interface. The software allows the use of vector reflectometers with both personal computers and tablets.
The device is supplied with software designed to operate in Window OS. Upon request, device software for use with the Linux OS is provided. The capability to use two reflectometers connected to a single USB controller for measuring S11, |S21|, |S12|, S22 parameters is supported.
Lightweight and compact, the reflectometer can be used in field conditions, industrial production environments, laboratories, and within automated measurement setups. The reflectometers support remote control via COM and TCP/IP Socket protocols.
CABAN vector reflectometers can be directly connected to the device under test without using microwave measurement cables. This increases measurement accuracy, reduces device operating costs, and saves time on calibration procedures, which can be performed less frequently and in convenient conditions.
The capability to use two reflectometers connected to a single USB controller for measuring S11, |S21|, |S12|, S22 parameters is supported.
Screen examples RVNA
.jpg)
