.jpg "Control panel “Cupol-GPS”")
On demand
- Control panel “Cupol-GPS” is mounted on a mobile object and intended for definition of the mobile object location and transmission of its coordinates to the centralized supervision console over the GSM (GPRS) or radio channel.
- Device is intended for exploitation with control panels “Cupol-GSM”, “Cupol-A” in composition of “Cupol” system.
- Operation over the RS485 wire line.
- Outer antenna included.
- Feeding over the RS485 communication line.
- Small dimension and light weight.
Description
On demand
Price Options
On demand
Add to cart
On demand
- Checking 8 zones of fire-guard alarm (FGA).
- One or multi-frequency operation capability in range 146-174MHz.
- Antenna-feeder equipment efficiency continuous checking.
- Built-in controller of Touch Memory.
- Device programming with help of PS-24 programmer.
Description
On demand
Price Options
On demand
Add to cart
.jpg "Control panel “Cupol-4L”")
On demand
- Checking 5 zones of fire-guard alarm (FGA).
- One or multi-frequency operation capability in range 146-174MHz.
- Antenna-feeder equipment efficiency continuous checking.
- Separate input for Touch Memory reader.
- Built-in back-UPS with output current 1,5 A and AccBattery 7A/h.
Description
On demand
Price Options
On demand
Add to cart
On demand
- Checking 16 zones of fireguard alarm (FGA).
- Support up to 4 partitions with independent setting/removal of guard mode.
- Built-in Touch Memory controller.
- One or multi-frequency operation capability in range 146-174MHz.
- Antenna-feeder equipment efficiency continuous.
- Compatible operation with devices “Cupol-3”, “Cupol-16T”, “Cupol-GSM”.
- Programming with help of PS-24 programmer.
Description
On demand
Price Options
On demand
Add to cart
On demand
- User operating frequency tuning capability.
- Multi-frequency operation capability.
- Antenna-feeder equipment efficiency continuous checking.
- High output power.
- Protection from non-standard operation (short, antenna disconnection, wrong polarity of power supply and so on).
- Width operating temperature range.
- Small dimension and light weight.
Description
On demand
Price Options
On demand
Add to cart
On demand
- Software “Cupol-16PO” is intended for realization a centralized supervision console (CSC) of wireless data transmit system (WTDS) “Cupol” based on “Cupol-16” equipment.
- CSC “Cupol” allows to organize centralized guarding the remote non-phoned objects and perform collecting the telemetric information.
- Besides, CSC operates as a console of a fire guarding.
- Software is designed as special program modules collection, working in close interaction. This way provides flexibility, system clearance, growing easiness.
- “Cupol-16PO” is developed to work for computer system contained from one or several computers united into local computing network, based on TCP/IP.
- Software operates under control of operation systems WINDOWS 95, 98, 98ME, WINDOWS NT and WINDOWS 2000.
Description
On demand
Price Options
On demand
Add to cart
On demand
- Operation at one or several frequencies in range 146-174 MHz
- RS485 interface support
- Continuous checking the antenna-feeder equipment
- Compatible operation with devices “Cupol-3”, “Cupol-16T”, “Cupol-GSM”
- Built-in back-UPS 12 V 1.5 A
- Inside accumulator up to 7A/h
Description
On demand
Price Options
On demand
Add to cart
On demand
- Small insertion losses while signal splitting
- UHF link connectors
- Feeding the antenna amplifier feature
- Small dimension and light weight
Description
On demand
Price Options
On demand
Add to cart
.jpg "Digital receiver “Cupol-DR”")
On demand
- Computer communication over RS232 or USB interfaces.
- High sensitivity and overloading.
- Frequency tuning with help of software.
- Built-in function of reception signal and interference level measurement.
- Radio ether listening feature be means built-in loud speaker.
- Threshold noise suppression control.
- Programming notifications filter.
- Built-in notifications flash memory.
Description
On demand
Price Options
On demand
Add to cart
.jpg "Control panel “Cupol-16T”")
On demand
- Checking 16 zones of fireguard alarm (FGA).
- Support up to 4 partitions with independent setting/removal of guard mode.
- Compatible operation with devices “Cupol-16”, “Cupol-TRS”, “Cupol-GSM”, “Cupol-4MP”.
- Built-in Touch Memory controller.
- Up to 16 control panels can be united in local network
- Programming with help of PS-24 programmer.
Description
On demand
Price Options
On demand
Add to cart
.jpg "Cupol-4MP")
On demand
- Increases operation radius and reliability of WDTS “Cupol”.
- Performs routing of the retranslated information packets from objects.
- Ensures level measuring of the received signals with further transmitting them to CSC.
- Operates as an object control panel.
- Possible to operate together with control panels “Cupol-3”, “Cupol-16T”, “Cupol-GSM” over the RS485 interface.
Description
On demand
Price Options
On demand
Add to cart
.jpg "Power Supply Filter")
On demand
The Power Supply Filter is designed for powering of the CUPOL System instruments and for RS-485 network building. It is also can be used as a power supply for instruments when hooked up to PC for setup and configuring.
Description
On demand
Price Options
On demand
Add to cart
Show more
.jpg)
