.jpg "Control panel “Cupol-GPS”")
- Control panel “Cupol-GPS” is mounted on a mobile object and intended for definition of the mobile object location and transmission of its coordinates to the centralized supervision console over the GSM (GPRS) or radio channel.
- Device is intended for exploitation with control panels “Cupol-GSM”, “Cupol-A” in composition of “Cupol” system.
- Operation over the RS485 wire line.
- Outer antenna included.
- Feeding over the RS485 communication line.
- Small dimension and light weight.
.jpg "Control panel “Cupol-4L”")
- Checking 5 zones of fire-guard alarm (FGA).
- One or multi-frequency operation capability in range 146-174MHz.
- Antenna-feeder equipment efficiency continuous checking.
- Separate input for Touch Memory reader.
- Built-in back-UPS with output current 1,5 A and AccBattery 7A/h.
- Checking 8 zones of fire-guard alarm (FGA).
- One or multi-frequency operation capability in range 146-174MHz.
- Antenna-feeder equipment efficiency continuous checking.
- Built-in controller of Touch Memory.
- Device programming with help of PS-24 programmer.
- Software “Cupol-16PO” is intended for realization a centralized supervision console (CSC) of wireless data transmit system (WTDS) “Cupol” based on “Cupol-16” equipment.
- CSC “Cupol” allows to organize centralized guarding the remote non-phoned objects and perform collecting the telemetric information.
- Besides, CSC operates as a console of a fire guarding.
- Software is designed as special program modules collection, working in close interaction. This way provides flexibility, system clearance, growing easiness.
- “Cupol-16PO” is developed to work for computer system contained from one or several computers united into local computing network, based on TCP/IP.
- Software operates under control of operation systems WINDOWS 95, 98, 98ME, WINDOWS NT and WINDOWS 2000.
- Operation at one or several frequencies in range 146-174 MHz
- RS485 interface support
- Continuous checking the antenna-feeder equipment
- Compatible operation with devices “Cupol-3”, “Cupol-16T”, “Cupol-GSM”
- Built-in back-UPS 12 V 1.5 A
- Inside accumulator up to 7A/h
.jpg "Control panel “Cupol-16T”")
- Checking 16 zones of fireguard alarm (FGA).
- Support up to 4 partitions with independent setting/removal of guard mode.
- Compatible operation with devices “Cupol-16”, “Cupol-TRS”, “Cupol-GSM”, “Cupol-4MP”.
- Built-in Touch Memory controller.
- Up to 16 control panels can be united in local network
- Programming with help of PS-24 programmer.
.jpg "Digital receiver “Cupol-DR”")
- Computer communication over RS232 or USB interfaces.
- High sensitivity and overloading.
- Frequency tuning with help of software.
- Built-in function of reception signal and interference level measurement.
- Radio ether listening feature be means built-in loud speaker.
- Threshold noise suppression control.
- Programming notifications filter.
- Built-in notifications flash memory.
- User operating frequency tuning capability.
- Multi-frequency operation capability.
- Antenna-feeder equipment efficiency continuous checking.
- High output power.
- Protection from non-standard operation (short, antenna disconnection, wrong polarity of power supply and so on).
- Width operating temperature range.
- Small dimension and light weight.
- Operation in network GSM 900/850 MHz and 1800/1900 MHz
- GPRS class 10 support
- Outer GSM antenna connection feature
- RS485 wire line communication support
- Compatible operation with control panels “Cupol-3”, “Cupol-16T”, “Cupol-GPS”
- Feeding over communication line RS485
- Small case and light weight
.jpg "Cupol-4MP")
- Increases operation radius and reliability of WDTS “Cupol”.
- Performs routing of the retranslated information packets from objects.
- Ensures level measuring of the received signals with further transmitting them to CSC.
- Operates as an object control panel.
- Possible to operate together with control panels “Cupol-3”, “Cupol-16T”, “Cupol-GSM” over the RS485 interface.
- Checking 16 zones of fireguard alarm (FGA).
- Support up to 4 partitions with independent setting/removal of guard mode.
- Built-in Touch Memory controller.
- One or multi-frequency operation capability in range 146-174MHz.
- Antenna-feeder equipment efficiency continuous.
- Compatible operation with devices “Cupol-3”, “Cupol-16T”, “Cupol-GSM”.
- Programming with help of PS-24 programmer.
.jpg "Control panel “Cupol-3”")
- 3 zones checking of fireguard alarm (FGA).
- Compatible operation with devices “Cupol-16”, “Cupol-TRS”, “Cupol-GSM”, “Cupol-4MP”.
- Built-in Touch Memory controller.
- Programming with help of a computer.
- Up to 32 “Cupol-3” can be united in a local network
- Operating frequency range of the system: transmission equipment 11-65 MHz, reception equipment 300-400 MHz.
- Guarding up to 2000 objects.
- Transmitting over 200 notifications.
- Connection channel continuous checking.
- Digital signal processing.
- High protection of connection channel.
CATV network data transmit system (CNDTS) “Cupol” is purposed for centralized guarding of remote stationary objects, monitoring of mobile objects, collecting of telemeter information, controlling of object execution devices, with the information transmitted over CATV network. CNDTS “Cupol” is purposed for managing of the object fireguard also. CNDTS “CUPOL” is a growable and tunable system and allows to provide all demands for objects guarding.
The main application fields of CNDTS “Cupol”:
- Guarding commercial, stock and industrial offices, shops etc.;
- Monitoring mobile objects (operating groups, technological transport);
- Guarding trade offices, garages and others non-phone objects;
- Guarding with help of “alarm” buttons;
- Object fireguarding;
- Monitoring industrial water and warm supplied systems.
System “Cupol” contains:
Object equipment:
- control panel “Cupol–4K”;
- control panel “Cupol–16K”;
- control panel “Cupol–16T”;
- modem “Cupol-MT”;
- modem “Cupol-GSM”;
- control panel console;
- back-up power supply;
- supplement equipment;
- guard and fire alarms;
- measuring sensors, execution devices (while monitoring the object).
- digital receiver “Cupol-DRc”;
- software “Cupol-16S”;
- back-up power supply “Cupol-BPS”;
- IBM compatible computer;
- Equipment of the computer power supply back-up.
While data transmitting, the error control coding and data transmission integrity are made, that allows to provide high error protection and system work large distance, non-authorized access protection to the data. All information entering from guarded objects is separated to telemeter and event information.
Telemeter information enters to CSC with programmed period and used for checking the signal pass from the real object and displaying its current state. While event information transmitting, it is repeated three times with the interval from 30 to 90 seconds with spreading the ether output time by accidental law. Transmitting all information about the object state is made while each data exchange, it provides reliable work of CNDTS “Cupol” at the signal missing.
The system operating frequency is by a customer while equipment ordering and in range 11…65 MHz for transmission and 300-400 MHz for reception equipment. With help of built-in software, CNDTS “Cupol” allows the operational change over the frequency in limits ±3 MHz from the central frequency.
CSC “Cupol” is a hard-n-soft complex based on IBM compatible computer and digital receivers “Cupol-DRc”. The digital receiver realizes the signal reception and primary processing.
In case of large number of served objects, it is possible to separate them to several operators, at this, CSC is based on several computers united in the local network.
The equipment CNDTS “Cupol” is purposed for the round-the-clock operation in the following climate conditions:
- Environment temperature +5 °C…+40 °C (optionally -40 °C…+50 °C);
- Relative humidity – up to 75% at 30 °C;
.jpg)
