New Products
IT-100 TV signals multisystem analyzer is designed to measure signals parameters of digital and analog television. The analyzer can be used when checking and servicing cable coaxial, fiber-optic or IP networks for receiving television and radio broadcasting, separate elements of network building and other radio electronic devices.
On demand
Price Options
On demand
On order
Add to cart
Need a consult?
Our experts will answer any technical question
Ask a question
Measuring TV signals parameters:
- Analog television: support for PAL, SECAM, NTSC standards.
Measured parameters: Level, Video/Audio, Carrier/Noise (inband and outband of video signal), modulation depth, unwanted modulation level (HUM), CSO&CTB distortion components level.
- Cable digital television: support for DVB-C, ITU-T J.83 Annex B, C standards.
Measured parameters: power, MER, BER, constellation diagram, error analysis over time.
- Terrestrial digital TV broadcasting: support for DVB-T, DVB-T2 standards.
Measured parameters: power, MER, BER, constellation diagram, echo diagram, error analysis over time.
- Satellite broadcasting digital television: support for DVB-S, DVB-S2 standards.
Measured parameters: power, MER, BER, constellation diagram, error analysis over time.
- IP digital television: support for UDP and RTP protocol, reception of the Transport Stream through unicast and multicast (IGMPv2).
Measured parameters: average bitrate, number of lost packets (for RTP), jitter of packets arrival interval.
Additional features of the IT-100 analyzer:
- Monitoring of TV picture and audio:
- Monitoring of PAL, SECAM, NTSC analog channels
- Monitoring of radio FM stations
- Monitoring of digital channels with MPEG-1, MPEG-2, MPEG-4, H.264 encoding with SD or HD resolution
- Monitoring of encrypted programs when installing the CAM module (with CI interface)
- Monitoring of IPTV channels
- MPEG Transport Stream analysis:
- Three-level analysis for compliance with the TR101290 requirements
- Real-time analysis
- Recording a transport stream to a file for further analysis
- Support of measurements in fiber optic cable network:
- Built-in optical receiver with a frequency range up to 2150MHz
- Support of all measurements from the optical input
- Measurement of optical signal power
- Operating in the wavelength range from 1100 to 1650 nm
- Replaceable FC and SC adapters of the input optical connector
- Power supply of external devices:
- Built-in remote feeding power supply from 5 to 24V
- Support for DiSEqC protocol level 2.1
- 5W power of remote feeding power supply
- Measurement of DC and AC voltage on the input RF connector
- Interface Support:
- USB 2.0 device for connecting the analyzer to a personal computer
- USB 2.0 host for connecting FLASH drives
- ETHERNET RJ45 10 / 100M for software updates, remote control and IPTV operation
- PCMCIA port for connecting a CAM module
- General specifications:
- Operating frequency range: 5 to 2150MHz
- Level measurement range: 20 to 120 dBμV
- Level measurement accuracy: ± 1.2dB
- Frequency step: 25 kHz
- Sweep time in the spectrum mode from 70 to 250 msec
- Built-in TFT color display 4.3 "with a resolution of 480x272 pixels
- Built-in speaker
- Operation from built-in battery and mains charger
- Battery life: 4 hours
- Analyzer weight: 1.5 kg
- Operating temperature range: -10 to +500С
IT100Sync software introduces the following functions:
- Create and edit channel plans, limit plans, satellites and LNB profiles
- Copy, move and delete files on IT-100 and USB flash drive connected to PC
- View measurement results in a convenient form
- Synchronize data between PC and the Meter
Software for OS Linux is available on request.
IT-100 firmware changelog
27,2 KB
datasheet_it-100_eng
1,4 MB
it100_build_210311
3 MB
Install_It100Sync_v1.0.4.0-1
13,3 MB
