- Frequency Range: from 0.1 MHz to 9.0 GHz
- Measured Parameters: S11, S21, S12, S22
- Impedance: 50Ω
- Number of Ports: 2
- Dynamic Range, Min: 160 dB typical
- Measurement time per point: 10 µs
- Output Power Range: from -60 to +15 dB/mW
- Compatibility with Frequency Range Extension Modules
- Mountable in 19'' Rack
Warranty: 3 years
On demand
Price Options
On demand
On order
Production time
10 weeks
Add to cart
Need a consult?
Our experts will answer any technical question
Ask a question
High-performance Cobalt series vector network analyzers with a frequency range from 0.1 MHz to 9.0 GHz have a reconfigurable measurement path with the ability to connect frequency extenders. Signal paths for connecting frequency extenders using removable 3.5 mm jumpers are located on the front panel of the device. Additionally, there are connectors on the rear panel of the analyzers for signal control and power transmission. Measured parameters: S11, S21, S12, S22
The presence of a signal test switch on the measurement ports of the C4209 allows for measuring all parameters with a single connection.
The C4209 is a two-port device.
Vector network analyzers are designed for measuring complex transmission and reflection coefficients (scattering matrix elements) of multiports. They are designed to work with an external computer, which is not included in the delivery set.
For operation in automated measurement setups, vector network analyzers support remote control via COM and TCP/IP Socket protocols.
The devices are supplied with software designed to work with Windows OS. Upon request, device software for Linux OS can be provided.
Analyzers in the series differ from each other in the number of measurement ports located on the front panel.
The C4209 is a two-port device.
Vector network analyzers are designed for measuring complex transmission and reflection coefficients (scattering matrix elements) of multiports. They are designed to work with an external computer, which is not included in the delivery set.
For operation in automated measurement setups, vector network analyzers support remote control via COM and TCP/IP Socket protocols.
The devices are supplied with software designed to work with Windows OS. Upon request, device software for Linux OS can be provided.
Analyzers in the series differ from each other in the number of measurement ports located on the front panel.
Analyzer block diagram
| Frequency Range | from 0.1 MHz to 9.0 GHz |
| Impedance | 50 Ω |
| Port Type | N type, female |
| Dynamic Range | 160 dB typical |
| Output Power Range | from -60 to +15 dB / mW |
| Measurement time per point | 10 µs |
| Number of Measurement Points | from 1 to 500,001 |
| Number of Channels | up to 16 logically independent measurement channels |
| Frequency resolution | 1 Hz |
| Full Frequency Accuracy | ±2x10–6 |
Cobalt series datasheet
2,2 MB
