- Frequency range: from 0.1 MHz to 9.0 GHz
- Measured parameters: S11, S21, S12, S22
- Impedance: 50 Ω
- Number of ports: 2
- Dynamic range: 160 dB
- Measurement time per point: 10 μs
- Output power range: -60…+15 dB/mW
- The functionality of the device can be expanded by ordering additional options
- Possibility of direct access to receivers
- Possibility of mounting in a 19'' rack
Warranty: 3 years
Need a consult?
Our experts will answer any technical questionVector network analyzer C2209 - a two-port device with jumpers for direct access to receivers.
Measured parameters are S11, S21, S12, S22.
The feature of the vector network analyzer C2209 is the reconfigurable measurement path with direct access to the generator/receivers of the device, which allows to increase the dynamic measurement range and expand the application area of the device. Signal paths are directly connected to the front panel using removable 3.5 mm jumpers, bypassing internal VSWR bridges and splitters. This provides direct access to the measurement signal path, allowing to increase or optimize the sensitivity of receivers for various measurement schemes, as well as to connect external devices to the measurement path to expand measurement capabilities.
Analyzer block diagram
Application
If you would like to consult with our engineers regarding the specific application of the C2209 vector network analyzer in your project, please use the "Ask a Question" form.
Software
The C2209 vector network analyzer is supplied with software designed to work with Windows OS. Upon request, device software for Linux OS is provided.
| Frequency Range | From 0.1 MHz to 9.0 GHz |
| Dynamic range, not less than, dB | 160 dB type |
| Output power, dBm | -60 to +15 |
| Frequency resolution, Hz | 1 |
| Measurement time per point, µs | 10 |
| Impedance, Ω | 50 |
| Number of ports, pcs | 2 |
| Measured parameters | S11, S21, S12, S22 |
| Power supply | ~ 220V |
| Operating temperature range, °C | From +5 to +40 |
| Dimensions, mm | 355×440×96 |
| Weight, kg | 7.0 |
|
Name |
Quantity, pcs |
|
Vector network analyzer |
1 |
|
USB cable |
1 |
|
Power cable |
1 |
|
Software |
1 |
|
User manual |
1 |
|
Calibration procedure |
1 |
|
Documentation |
1 |
Notes:
1) Software and documentation are provided on a USB flash drive.
2) The user manual consists of two parts.
3) Accessories, including measurement cables, adapters, and calibration tools, are available on separate order.
