Vector Network Analyzer Cobalt-M CM222

CM222 is a two-port analyzer with one internal signal generator. 

The analyzers have connectors on the front panel for direct access to generators and measuring receivers. The configurable analyzer path allows you to assemble a measuring setup that expands the dynamic range of measurements and the range of permissible power by using additional devices: amplifiers, attenuators, directional couplers. 

The analyzer configuration can be supplemented with internal electromechanical attenuators for signal sources and measuring receivers. The use of electromechanical attenuators in the signal source path provides an extension of the lower limit of the output power level setting range from -95 dB (typ). Electromechanical attenuators in the measuring receiver path ensure linear operation of the receivers when measuring active devices with high output power.

The Cobalt-M analyzers are equipped with internal pulse modulators, which allow the formation of a pulsed stimulating RF signal with a minimum duration of 100 ns without the use of external modulators.

Internal pulse generators provide signal output to rear panel connectors and ensure synchronization of the measured devices with the measurement setup. The PLS option enables pulse profile measurements with a minimum time resolution of 100 ns.

Application

If you would like to consult our engineers regarding the use of the CM222 network analyzer in your project, please use the "Ask a Question" form.

Software

The CM222 vector network analyzer comes with software compatible with the Windows operating system. Software for working with Linux OS is available upon request.